Our Winchester 94 dovetail mount for red dot sights couldn’t be easier to install. Click the play button to watch the Quick Tip video.
More and more lever-action rifle hunters are turning to red dot sights from Burris, Vortex, Docter and others. For those of us relying on the venerable Winchester 94 in the field, installing our Model 92/94 barrel mount for your FastFire™ or Docter red dot sight couldn’t be easier.
Turnbull Restoration’s Steve Lester takes us through the quick and easy process of installing a barrel mount for red dot reflex sights. Turnbull’s red dot barrel mounts work on both Winchester models 1894 and 1892 with round barrels, and accommodate FastFire models 1 through 4, Vortex Venom, as well as Docter red dot sights. See our full listing of compatible sights.
Tools used for this red dot sight mount installation:
- Bench vise
- Padded wooden vise jaw
- Paper card
- Ball-peen hammer
- Brass punch (taped to prevent barrel marring)
- Flat head screwdriver
Related Content:
- Turnbull Restoration mounting plates for Burris FastFire, Vortex Venom, and other red dot sights. Choose from the following models: Winchester Model 94 / 1892 barrel; Winchester Model 71 / 1886 receiver; Winchester Model 94 / 1892 receiver
- Turnbull Restoration mounting plates for Trijicon RMR, Holosun 507C X2, and other red dot sights. Choose from the following models: Winchester Model 94 / 1892 barrel; Winchester Model 71 / 1886 receiver; Winchester Model 94 / 1892 receiver
Quick question?
Can the front sight post remain if the red dot sight is mounted or does it have to be removed (Model 94)
Hi Bennett,
Yes, the front sight post remains and the red dot sight shoots over it.
I have a pre 64 Winchester model 94 30/30 . I have a osprey red dot /green dot . It has the quick release flip on the side will it hook up fit on your rail . I’m getting old and iron sights are a little hard for me now . Bought the gun new in 64
Hi Jim,
I’m not sure if that will work, as we haven’t tried it in house. You’d be welcome to try it out; if you find that it doesn’t work you can mail it back for a full refund, less $10 shipping and handling.
Thanks,
Sara
i have a win mod 62 pump. barrel is 18.00mm dia.(0.709″)at rear site. Any chance the mod 94 adaptor will work.
Am fitting a Votex venom red dot.
Hi Steve,
I don’t believe it will work, although it’s not something we’ve tried.
Thanks,
Sara
Great product for a Red Dot on a 94
My question is, will the product suitable for a 1928 made Model 94?
Hi guys I have a Winchester ranger in 30-30 and hoping to fit a vortex venom red dot. Do you have a mount for this in stock? I’m in NZ but have friends in the states that could ship on to my address as it says you don’t ship to NZ. Thanks.
Hi Daely,
Thanks for contacting us. You can use the Docter/Noblex mount for the Vortex Venom. We can only ship these domestically.
Thanks,
Sara
Hello
I am very interested I a purchase of sitar mounts for a model 94 Winchester 30-30. I am in eastern Canada
Hi, Shawn, thanks for commenting. Unfortunately we aren’t able to ship these internationally. Please let me know if I can help with anything else.
Sara
I live in Australia is it possible to purchase the red dot mount for my Winchester 94.
Hi Noel,
Unfortunately we aren’t able to ship these internationally.
Thanks,
Sara
I have a octagon barrel on my Winchester 30-30. Will it work on it.
Hi Ronnie,
No, these barrel mounts will only work with round barrels.
Thanks,
Sara
How do I go about purchasing one of these mounts for my model 94
If they’re sold out when you’re looking, send us an email at info@turnbullrestoration.com to get on a waitlist. Otherwise you can purchase through the website or call to purchase. Please note, we are unfortunately unable to ship these internationally.
Will this on a Winchester 290? If not, could you suggest what Red Dot would work? Thank you
Hi Brad,
I don’t believe so, but it’s not something we’ve tested. Unfortunately I don’t have any recommendations.
Thanks,
Sara