FastFire Receiver Mount – Model 71 and 1886

Rated 5.00 out of 5 based on 4 customer ratings
(4 customer reviews)


Log Number: FF86/71 Categories: ,


  • This listing is for the sight mount ONLY.
  • This product sells/ships to United States customers only. No international sales/shipments.
  • Winchester Model 71/1886 Receiver Mount for red dot sights using the Docter/Noblex standard footprint, making our mount compatible with a long list of optics (see table below).
  • Rifles not already drilled and tapped for receiver mounted sights will require two holes to be drilled & tapped in the left side of the receiver. These holes should be installed by a qualified gunsmith.
  • Turnbull Restoration offers installation (drill & tap) if needed. Click here for more information.

Order now using our shopping cart; standard ground shipping fees are included. Need to receive it faster? Contact us to place your order.

Docter/Noblex Footprint Standard

The Docter/Noblex standard is simple and reliable, and is one of the most widely-used footprints in the field of red dot sights.

Burris Fastfire 2
Burris Fastfire 3
Delta Optical MiniDot
Delta Optical MiniDot II
Docter/Noblex QUICKsight 5.0 VR
Docter/Noblex Sight C

Docter/Noblex Sight 2+
Docter/Noblex Sight III
Hawke Reflex 1×25
Leica Tempus
MAKdot 1×25
Noblex Sight G

Sightmark Mini Shot M-Spec
Sightmark Mini Shot Pro Spec
Vector Optics Frenzy 1x20x28
Vomz Pilad 1×20
Vortex Venom
Vortex Viper

Additional information

Log Number FF86/71
Weight 2 oz

To Order Or For More Information

  • This field is for validation purposes and should be left unchanged.

4 reviews for FastFire Receiver Mount – Model 71 and 1886

  1. Rated 5 out of 5

    Terry Romans

    I use this on my 1886 475 Turnbull and my Turnbull 1886 45-70. I use the Trijicon RMR 1MOA on both 86’s. Trijicon makes an adaptor plate for the Doctor (Same footprint as the Burris) allowing the RMR to be used on this mount. Works great for those middle aged eyes and the 1 MOA dot is nice for longer shots. Never had a problem with the mount even on tough B.C. grizzly hunts.

    • Sara Turnbull (verified owner)

      Thanks for the tip, Terry! A lot of people do ask about using different sights with this mount. Glad it’s working well for you!

  2. Rated 5 out of 5

    Terry Romans

    This RMR adapter plate for Docter mounts from Trijicon (Trijicon Item/Part# RM 37) facilitates the mounting of a Trijicon RMR sight to a Docter MS10, MS15, or MS39 mount. The Burris Fast Fire mount is the same footprint as the the Doctor. The part they need is referenced above. IMO the Trijicon is a much more robust and field tested red dot sight. The kit comes with a sealing plate for the Trijicon, however I prefer the one manufactured from BattleWerks. It has a hump that keeps pressure on the battery, thus keeping positive pressure applied to prevent any battery movement during recoil. Hope this helps those of us with older eyesight that makes open sights…….well……. “hood ornaments”.,

  3. Rated 5 out of 5


    Hi guys. I have a 30-30 model 94 top ejector and I’m after this set up. Appreciated if anyone knew the parts numbers for adapter for the red dot to sit on as well as a good red dot 1 MOA

    • Sara Turnbull (verified owner)

      Hi Guy,
      This mount should work for you without any adapter. As long as your rifle is drilled and tapped you’ll be able to attach this and then put the Burris FastFire or Docter sight on the mount.

  4. Rated 5 out of 5


    What about a mount for the Trijicon MRO?

    • Sara Turnbull (verified owner)

      Hi Matt,
      I’m not sure if the Trijicon MRO would work with this mount; we’ve specifically designed it for the Burris FastFire and Docter Optics.

Add a review

Your email address will not be published. Required fields are marked *